Techtransservice LLC was created at 04/06/2009.

For the development of our company were existed branches in Olenegorsk and Kirovsk Murmansk region.

Priority directions of TTS are repair and maintenance of mining equipment. Techtransservice has all operating and rebuild services and staff with  
the ultimate state-of-the-art facilities, and 24/7 service. We have mobile repair shops on wheelbase KAMAZ and International.

Our high qualified staff make a capital repair of cargo bed CAT and BELAZ, and scoops of frontal loaders and excavators, using the modern welding  
equipment and materilas. in 2014 were repaired 18 cargo beds and 14 scoops by us.

For the best results our company is always looking for higher quality using of vehicles and equipment, for good measure about ecology, indistrial  
safety and health of employees.

For high quality of pit roads, we made a modernization of dust depressing vehicles BELAZ 7648A with application of new construction of water  
sprayer. The quality and water charge by wide-cut sprayers are easy to control and regulate according to the needs of dust depressing. All of those  
make possible to spray water to 20 meters wide, and efficiency of dust depressing vehicle increase in 2 times.

One of last unique achievement of our company is production project of vehicle for transportation of EKG-10, EKG-10P, EKG-12 excavators on base  
of BELAZ-75131 truck. We have done a high power electric-towing vehicle. It helps to change place of work for such excavators.
Techtransservice LLC is the one of the partners of “KarelskiyOkatish” Company and “Olkon” JSC.

Techtransservice has all operating and rebuild services, more than 350 people work with the ultimate state-of-the-art facilities, and 24/7 service.
Technological park of our vehicles are a rows of specialized vehicles based on BELAZ, such as:
-dust depressing vehicles;
-sand-and-broken-rock spreaders;
-dump trucks,All of these vehicles are using on the building of the mine and pit roads of “KarelskiyOkatish” company and “Olkon” JSC.

The professional employees of our company are high qualified engineers, mechanics specialists of maintenance, top managers.
Management of Techtransservice LLC always invests resources into professional development and advanced training of their personal.
Iowa Mold Tooling

Tyre fitting shop of the German company TROMMELBERG

Today our tire repair center provides qualified tire repair, allows you to return the damaged tire  in operation at minimum cost. Serious experience attracted specialists supplemented advanced equipment and the best supplies, which in turn provides an unconditional quality of repair tires of any specification. Professional tire repair in our service carried out in the following areas:

• Removing sharp objects from the tread with subsequent repair technology "hot curing" or "plugging" the holes with a harness with a sealed envelope adhesive;
• repair of cuts on the side of the tire;
• replacing a broken camera and valves;
• wheel balancing;
• finish balancing.


Professional wheel balancing in our service center - is clearly organized process, included in the complex maintenance wheel, which is carried out using high-precision imported equipment. The use of high-quality lead and zinc weights ensures reliable fastening and high aesthetics miniature sheets.

Repair and maintanance, diagnostics of diesel engines

Our Company made a reconstruction of equipment and put in action new high capacity equipment for repair and maintenance vehicles, such as: engine repair stand; our specialists make a repair and maintenance YAMZ, Cummins, ZIL, MAZ, GAZ, MTU, Detroit Diesel engines.

Our company has a big experience in repair and maintenance, diagnostics of diesel engines.

Due to high level of professional and long experience our specialists are in top of their field, what’s could make repair of any complexity, and heavy repair of engines and its systems.

A solid powerful monile boring machine

A solid powerful mobile boring machine for oversize reboring diameter from 35 mm till 610mm, combined boring row of uniaxial holes on the distance till 5m and depth over the one pass 915mm.

Total depth of rough hole depends on the length of rod. This machine consists of spinning drive(hydraulic, pneumatic or electric- for your choice), unit of the power feed, rod, instrumental head, cutting unit kit, accessories kit for fastening on unit and hydro station drive for matched models. Feed and direction could be any possible.

Argon arc, air arc, plasma arc cutting

Our high qualified personal can do many kinds of welding works of metal ware of any difficulty using argon arc, air arc, plasma arc cutting machines, including using the best welding and alloy materials.

Production of high pressure hoses

TUBOMATIC machine
TUBOMATIC consists of mechanic hydraulic jacks for production high pressure hoses. The opportunity of this machine is to produce high pressure hoses from 5mm till 71mm.


Techtransservice LLC for the long period of time specializing in looking for defects and repair of hydraulic systems and units.
For repair and maintenance of axial-piston pumps and other different pumps, our engineers made a running-in stand for axial-piston pump with programmable remote control, which allow to control required characteristics of pump in different conditions and install it on vehicles without any additional acting.

Mobile repair workshop

For our fast reaction and producing of planning and emergency works, our company has a service vehicles such as: TOYOTA TUNDRA which has a power state electric machine SDMO DIESEL 15000TE. Qualified service engineer ready to do any type of service diagnostics and repair of your mechanical units at your site.

To use vertical transport we have specialized vehicle INTERNATIONAL 4900 which has crane of 10 tones capacity. All of these vehicles are ready to take our engineers to decide any repair and maintenance problem directly at your location.

Repair of electric engines

Being an official representative of the Plant of repair of electrical machines SZEMO "Electromashina" and having own servicing centers allows us to provide the whole range of repairs of electrical machines ETV-20, EDP -600, EC-590, DK-722, IPHE-200, MPE-200 600 4GPE-4GPE-300, D-808, TED-6, GTS-1 and many others:
· Rotor balancing,
· Repair and restoration of bearing assemblies,
· Production of the stator / rotor
· Repair of the stator / rotor winding replacement,
· Repair of the active components of stator
· Insulation upgrading,
· A complete survey of the motor using a thermal imager,
· Cycle Test of the repaired equipment.
Being an official representative of the Plant of repair of electrical machines SZEMO "Electromashina" and having own servicing centers allows us to provide the whole range of repairs of electrical machines ETV-20, EDP -600, EC-590, DK-722, IPHE-200, MPE-200 600 4GPE-4GPE-300, D-808, TED-6, GTS-1 and many others:
· Rotor balancing,
· Repair and restoration of bearing assemblies,
· Production of the stator / rotor
· Repair of the stator / rotor winding replacement,
· Repair of the active components of stator
· Insulation upgrading,
· A complete survey of the motor using a thermal imager,
· Cycle Test of the repaired equipment.

Washing of units and aggregates

We could not ignore the washing of units and aggregates before beginning of any maintenance and repair, and we could not wash it by the hands because it is very hard to do.

That’s why we placed in actionWashing machine M216U2 which can wash all, 2000kg per hour, it let us to do a big volume of repair, make higher the quality and length of maintenance and repair. This machine is leak proof construction, and we wash all units and aggregates inside of this machine.

At the end of washing, units and aggregates are diagnosed on specialized stands.

Manufacture and repair of key grooves

Produce or repair chases under spline
Due to different settings, screws of boring bars and instrumental heads from this machine could be used for solving of big quantity of tasks, by using additional units for inside welding and processing of flange areas.

You don’t need to bring your equipment and units for repair and maintenance - our mechanics and engineers will come to you.

With our portable mill KM3000, we produce or repair chases under spline and can do other kinds of mill works.

Repair and maintanance hydraulic and fuel pumps

We are making professional repair of hydraulic pumps hydromotors of such poducers as:
BOSCH-REXROTH, DANFOSS, POCLAIN, VICKERS, SAUER, LIEBHERR, CATERPILLAR, CALZONI, LINDE, VOLVO, KAYABA, STEIMEL, HPI, UCHIDA, PARKER, HAGGLUNDS


Repair of pumps is doing by high level specialists with very big experience, unique equipment wich help to test pumps after repair. We do the best to make the level of repair higher.

Installation and maintanance of air conditioners, coolers and heaters

Today our tire repair center provides qualified tire repair, allows you to return the damaged tire  in operation at minimum cost. Serious experience attracted specialists supplemented advanced equipment and the best supplies, which in turn provides an unconditional quality of repair tires of any specification. Professional tire repair in our service carried out in the following areas:
• Removing sharp objects from the tread with subsequent repair technology "hot curing" or "plugging" the holes with a harness with a sealed envelope adhesive;
• repair of cuts on the side of the tire;
• replacing a broken camera and valves;
• wheel balancing;
• finish balancing.
Professional wheel balancing in our service center - is clearly organized process, included in the complex maintenance wheel, which is carried out using high-precision imported equipment. The use of high-quality lead and zinc weights ensures reliable fastening and high aesthetics miniature sheets.

Webasto heaters
To our customers we offer the following services:
· Repair and installation of heaters and pre-launch preheaters Webasto for cars, trucks, vans, minibuses, special vehicles.
· Troubleshooting and error reset, using the original diagnostic equipment WebastoThermoTest.

Installatoin and maintanance of fire suppression systems for vehicles

Our specialists can install and make maintanance cervices of AFEX fire suppression systems for mobile equipment. Depending on the need of the customer we can offer automatic systems which discharge once the fire is detected or manual systems which can be discharged manually. Automatic system has sound alarm. Systems also have engine shutdown mechanism which shuts the engine automatically when the fire is detected.

For our clients we can offer dry or wet agent systems or dual agent which has both agents dry and wet.

These systems are constructed to protect mining equipment which is used in open and underground mining.

AFEX fire suppression systems are approved to be used for fire protection for mining, forestry and construction vehicles.
WELCOM TO "TECHTRANSSERVICE" LLC
WELCOM TO "TECHTRANSSERVICE" LLC
Back
Next
Our specialists and engineers help you to solve any problems and faults, including repair and maintenance using all production facilities what we  
have. We can make a detailed analysis and diagnostics of any broken units or equipment’s failure; we can project and develop any technological  
decision by the various methods to repair: excavators, dozers, frontal loaders, bucket grabs, scoops, stationary metal constructions, hangers,  
compression-type machines and other equipment in different branches of industry.

We have all required accessories, equipment and facilities.

Our specialists can do all calculations and design demand improvements of repair details and units with necessary safety factor subject to flexibility  
of metals, and of course, gather weld materials to increase degree of reliability of repaired constructions in operation.
All rights reserved. www.techtransservice.ru "Techtransservice" LLC © 2015
COMPANY
SERVICES
PARTNERS
CERTIFICATES
CLIENTS
CONTACT INFORMATION
COMPANY
Techtransservice LLC was created at 04/06/2009.

For the development of our company were existed branches in Olenegorsk and Kirovsk Murmansk region.

Priority directions of TTS are repair and maintenance of mining equipment. Techtransservice has all operating and rebuild services and staff with  
the ultimate state-of-the-art facilities, and 24/7 service. We have mobile repair shops on wheelbase KAMAZ and International.

Our high qualified staff make a capital repair of cargo bed CAT and BELAZ, and scoops of frontal loaders and excavators, using the modern welding  
equipment and materilas. in 2014 were repaired 18 cargo beds and 14 scoops by us.

For the best results our company is always looking for higher quality using of vehicles and equipment, for good measure about ecology, indistrial  
safety and health of employees.

For high quality of pit roads, we made a modernization of dust depressing vehicles BELAZ 7648A with application of new construction of water  
sprayer. The quality and water charge by wide-cut sprayers are easy to control and regulate according to the needs of dust depressing. All of those  
make possible to spray water to 20 meters wide, and efficiency of dust depressing vehicle increase in 2 times.

One of last unique achievement of our company is production project of vehicle for transportation of EKG-10, EKG-10P, EKG-12 excavators on base  
of BELAZ-75131 truck. We have done a high power electric-towing vehicle. It helps to change place of work for such excavators.
Techtransservice LLC is the one of the partners of “KarelskiyOkatish” Company and “Olkon” JSC.

Techtransservice has all operating and rebuild services, more than 350 people work with the ultimate state-of-the-art facilities, and 24/7 service.
Technological park of our vehicles are a rows of specialized vehicles based on BELAZ, such as:
-dust depressing vehicles;
-sand-and-broken-rock spreaders;
-dump trucks,All of these vehicles are using on the building of the mine and pit roads of “KarelskiyOkatish” company and “Olkon” JSC.

The professional employees of our company are high qualified engineers, mechanics specialists of maintenance, top managers.
Management of Techtransservice LLC always invests resources into professional development and advanced training of their personal.
SERVICES
Our specialists and engineers help you to solve any problems and faults, including repair and maintenance using all production facilities what we  
have. We can make a detailed analysis and diagnostics of any broken units or equipment’s failure; we can project and develop any technological  
decision by the various methods to repair: excavators, dozers, frontal loaders, bucket grabs, scoops, stationary metal constructions, hangers,  
compression-type machines and other equipment in different branches of industry.

We have all required accessories, equipment and facilities.

Our specialists can do all calculations and design demand improvements of repair details and units with necessary safety factor subject to flexibility  
of metals, and of course, gather weld materials to increase degree of reliability of repaired constructions in operation.
PARTNERS
Iowa Mold Tooling
CERTIFICATES
CLIENTS
CONTACT INFORMATION
All rights reserved. www.techtransservice.ru "Techtransservice" LLC © 2015
WELCOM TO "TECHTRANSSERVICE" LLC
WELCOM TO "TECHTRANSSERVICE" LLC
Back
Next
COMPANY
Techtransservice LLC was created at 04/06/2009.

For the development of our company were existed branches in Olenegorsk and Kirovsk Murmansk region.

Priority directions of TTS are repair and maintenance of mining equipment. Techtransservice has all operating and rebuild  
services and staff with the ultimate state-of-the-art facilities, and 24/7 service. We have mobile repair shops on wheelbase  
KAMAZ and International.

Our high qualified staff make a capital repair of cargo bed CAT and BELAZ, and scoops of frontal loaders and excavators, using  
the modern welding equipment and materilas. in 2014 were repaired 18 cargo beds and 14 scoops by us.

For the best results our company is always looking for higher quality using of vehicles and equipment, for good measure about  
ecology, indistrial safety and health of employees.

For high quality of pit roads, we made a modernization of dust depressing vehicles BELAZ 7648A with application of new  
construction of water sprayer. The quality and water charge by wide-cut sprayers are easy to control and regulate according to  
the needs of dust depressing. All of those make possible to spray water to 20 meters wide, and efficiency of dust depressing  
vehicle increase in 2 times.

One of last unique achievement of our company is production project of vehicle for transportation of EKG-10, EKG-10P, EKG-12  
excavators on base of BELAZ-75131 truck. We have done a high power electric-towing vehicle. It helps to change place of work  
for such excavators.
Techtransservice LLC is the one of the partners of “KarelskiyOkatish” Company and “Olkon” JSC.

Techtransservice has all operating and rebuild services, more than 350 people work with the ultimate state-of-the-art facilities,  
and 24/7 service.
Technological park of our vehicles are a rows of specialized vehicles based on BELAZ, such as:
-dust depressing vehicles;
-sand-and-broken-rock spreaders;
-dump trucks,All of these vehicles are using on the building of the mine and pit roads of “KarelskiyOkatish” company and  
“Olkon” JSC.

The professional employees of our company are high qualified engineers, mechanics specialists of maintenance, top managers.
Management of Techtransservice LLC always invests resources into professional development and advanced training of their  
personal.
SERVICES
Our specialists and engineers help you to solve any problems and faults, including repair and maintenance using all production  
facilities what we have. We can make a detailed analysis and diagnostics of any broken units or equipment’s failure; we can  
project and develop any technological decision by the various methods to repair: excavators, dozers, frontal loaders, bucket  
grabs, scoops, stationary metal constructions, hangers, compression-type machines and other equipment in different branches of  
industry.

We have all required accessories, equipment and facilities.

Our specialists can do all calculations and design demand improvements of repair details and units with necessary safety factor  
subject to flexibility of metals, and of course, gather weld materials to increase degree of reliability of repaired constructions in  
operation.

Tyre fitting shop of the German company TROMMELBERG

Today our tire repair center provides qualified tire repair, allows you to return the damaged tire  in operation at minimum cost. Serious experience attracted specialists supplemented advanced equipment and the best supplies, which in turn provides an unconditional quality of repair tires of any specification. Professional tire repair in our service carried out in the following areas:

• Removing sharp objects from the tread with subsequent repair technology "hot curing" or "plugging" the holes with a harness with a sealed envelope adhesive;
• repair of cuts on the side of the tire;
• replacing a broken camera and valves;
• wheel balancing;
• finish balancing.

Professional wheel balancing in our service center - is clearly organized process, included in the complex maintenance wheel, which is carried out using high-precision imported equipment. The use of high-quality lead and zinc weights ensures reliable fastening and high aesthetics miniature sheets.

Repair and maintanance, diagnostics of diesel engines

Our Company made a reconstruction of equipment and put in action new high capacity equipment for repair and maintenance vehicles, such as: engine repair stand; our specialists make a repair and maintenance YAMZ, Cummins, ZIL, MAZ, GAZ, MTU, Detroit Diesel engines.

Our company has a big experience in repair and maintenance, diagnostics of diesel engines.

Due to high level of professional and long experience our specialists are in top of their field, what’s could make repair of any complexity, and heavy repair of engines and its systems.

A solid powerful monile boring machine

A solid powerful mobile boring machine for oversize reboring diameter from 35 mm till 610mm, combined boring row of uniaxial holes on the distance till 5m and depth over the one pass 915mm.

Total depth of rough hole depends on the length of rod. This machine consists of spinning drive(hydraulic, pneumatic or electric- for your choice), unit of the power feed, rod, instrumental head, cutting unit kit, accessories kit for fastening on unit and hydro station drive for matched models. Feed and direction could be any possible.

Argon arc, air arc, plasma arc cutting

Our high qualified personal can do many kinds of welding works of metal ware of any difficulty using argon arc, air arc, plasma arc cutting machines, including using the best welding and alloy materials.

Production of high pressure hoses

TUBOMATIC machine
TUBOMATIC consists of mechanic hydraulic jacks for production high pressure hoses. The opportunity of this machine is to produce high pressure hoses from 5mm till 71mm.

Techtransservice LLC for the long period of time specializing in looking for defects and repair of hydraulic systems and units.
For repair and maintenance of axial-piston pumps and other different pumps, our engineers made a running-in stand for axial-piston pump with programmable remote control, which allow to control required characteristics of pump in different conditions and install it on vehicles without any additional acting.

Mobile repair workshop

For our fast reaction and producing of planning and emergency works, our company has a service vehicles such as: TOYOTA TUNDRA which has a power state electric machine SDMO DIESEL 15000TE. Qualified service engineer ready to do any type of service diagnostics and repair of your mechanical units at your site.

To use vertical transport we have specialized vehicle INTERNATIONAL 4900 which has crane of 10 tones capacity. All of these vehicles are ready to take our engineers to decide any repair and maintenance problem directly at your location.

Repair of electric engines

Being an official representative of the Plant of repair of electrical machines SZEMO "Electromashina" and having own servicing centers allows us to provide the whole range of repairs of electrical machines ETV-20, EDP -600, EC-590, DK-722, IPHE-200, MPE-200 600 4GPE-4GPE-300, D-808, TED-6, GTS-1 and many others:
· Rotor balancing,
· Repair and restoration of bearing assemblies,
· Production of the stator / rotor
· Repair of the stator / rotor winding replacement,
· Repair of the active components of stator
· Insulation upgrading,
· A complete survey of the motor using a thermal imager,
· Cycle Test of the repaired equipment.

Washing of units and aggregates

We could not ignore the washing of units and aggregates before beginning of any maintenance and repair, and we could not wash it by the hands because it is very hard to do.

That’s why we placed in actionWashing machine M216U2 which can wash all, 2000kg per hour, it let us to do a big volume of repair, make higher the quality and length of maintenance and repair. This machine is leak proof construction, and we wash all units and aggregates inside of this machine.

At the end of washing, units and aggregates are diagnosed on specialized stands.

Manufacture and repair of key grooves

Produce or repair chases under spline
Due to different settings, screws of boring bars and instrumental heads from this machine could be used for solving of big quantity of tasks, by using additional units for inside welding and processing of flange areas.

You don’t need to bring your equipment and units for repair and maintenance - our mechanics and engineers will come to you.

With our portable mill KM3000, we produce or repair chases under spline and can do other kinds of mill works.

Repair and maintanance hydraulic and fuel pumps

We are making professional repair of hydraulic pumps hydromotors of such poducers as:
BOSCH-REXROTH, DANFOSS, POCLAIN, VICKERS, SAUER, LIEBHERR, CATERPILLAR, CALZONI, LINDE, VOLVO, KAYABA, STEIMEL, HPI, UCHIDA, PARKER, HAGGLUNDS

Repair of pumps is doing by high level specialists with very big experience, unique equipment wich help to test pumps after repair. We do the best to make the level of repair higher.

Installation and maintanance of air conditioners, coolers and heaters

Today our tire repair center provides qualified tire repair, allows you to return the damaged tire  in operation at minimum cost. Serious experience attracted specialists supplemented advanced equipment and the best supplies, which in turn provides an unconditional quality of repair tires of any specification. Professional tire repair in our service carried out in the following areas:

• Removing sharp objects from the tread with subsequent repair technology "hot curing" or "plugging" the holes with a harness with a sealed envelope adhesive;
• repair of cuts on the side of the tire;
• replacing a broken camera and valves;
• wheel balancing;
• finish balancing.

Professional wheel balancing in our service center - is clearly organized process, included in the complex maintenance wheel, which is carried out using high-precision imported equipment. The use of high-quality lead and zinc weights ensures reliable fastening and high aesthetics miniature sheets.
Webasto heaters
To our customers we offer the following services:
· Repair and installation of heaters and pre-launch preheaters Webasto for cars, trucks, vans, minibuses, special vehicles.
· Troubleshooting and error reset, using the original diagnostic equipment WebastoThermoTest.

Installatoin and maintanance of fire suppression systems for vehicles

Our specialists can install and make maintanance cervices of AFEX fire suppression systems for mobile equipment. Depending on the need of the customer we can offer automatic systems which discharge once the fire is detected or manual systems which can be discharged manually. Automatic system has sound alarm. Systems also have engine shutdown mechanism which shuts the engine automatically when the fire is detected.

For our clients we can offer dry or wet agent systems or dual agent which has both agents dry and wet.

These systems are constructed to protect mining equipment which is used in open and underground mining.

AFEX fire suppression systems are approved to be used for fire protection for mining, forestry and construction vehicles.
PARTNERS
Iowa Mold Tooling
CERTIFICATES
CLIENTS
CONTACT INFORMATION
All rights reserved. www.techtransservice.ru "Techtransservice" LLC © 2015